Here is a list of the parts required for this project and the cost.

********************************************************************************
Axle housing				$150.00		$150.00*
 BOM of housing (as it appears stamped on the axle)
     1 2  8  6  A  4           603808 5
 
Alan's Gear Works
29870 US 19 N
Clearwater, FL 33761
727-784-0452

	Total	for Alan's Gear  Works				$160.00
********************************************************************************
Hubs, Knuckles, Spindles & Brakes:

Parts I got from Autozone, home of the no question lifetime warranty :-)

upper ball Joints
PERFECT_CIRCLE		LLT     FA659G	$22.99 (2)	$ 35.98*
lower ball Joints
PERFECT_CIRCLE		LLT   	FA660G	$21.99 (2)	$ 43.98*

Wheel bearings 
(I opted for the china ones, they have good prison labor!)
TIMKEN INNER  			SET37	$ 13.99 
TIMKEN OUTER  			SET45	$ 10.99 
COAST-TO-COAST INNER  		VL37 	$  8.99 (2)	$ 17.98*
COAST-TO-COAST OUTER  		VL45   	$  5.99 (2)	$ 11.98*
	
Wheel seal
TIMKEN INNER  			4250    $  5.79 (2)	$ 11.58*

Brake rotors and hubs 
(I opted for the cheapie one piece units....)
AIMCO 
HUB/ROTOR ASSEMBLY  	1 YR   	5492	$ 30.99 (2)	$ 61.98*

AIMCO_EXTREME 
LEFT HAND SIDE   	3 MO   	5446RX	$ 81.99 
AIMCO_EXTREME 
RIGHT HAND SIDE  	3 MO   	5446RX	$ 81.99 


Caliper - Left 			C512 	$ 12.74 	$ 12.74*
		core			$ 10.00		$ 10.00
Caliper - Right 		C513 	$ 12.74 	$ 12.74*
		core			$ 10.00		$ 10.00
Brake pads 			MKD50	$ 15.49		$ 15.49*
Spindle Bearing/Seal Kit  	SBK1	$  9.99 (2)	$ 19.98*
brake hardware kit 		H5545 	$  7.99 	$  7.99*
Bolt - retaining key	 	H5025 	$  2.69 	$  2.69*
4wd spindle nut socket		25072	$ 17.99 	$ 17.99*

U-Joints
PDQ  3 MO   			1-0297	$  8.99 
PDQ   3 MO    greasable		1-0298	$ 18.99
BRUTE_FORCE   1 YR   		1-0297BF$ 13.99	
lifetime syn lithium grease...yada yada yda

Autozone total		273.10  +7% tax +20 cores = 		$312.22

********************************************************************************
Gears and locker:

www.completeoffroad.com parts 1-708-921-2962

Detroit Locker D44 - 30 spline		$499.00		$499.00
yukon r&p		44D/513R	$149.00		$149.00
yukon r&p		44D/513 	$149.00		$149.00

install kit   			25-2033	$ 76.00		$ 76.00

inner axle seals			$  4.50		$  9.00
F150 Spindles				$ 60.00		$120.00
ford outer axle 9.72"			$ 19.00		$ 38.00
Diff cover - used 			$ 15.00		$ 15.00
shipping 				$ 35.00		$ 35.00

 total for complete offroad  			       		$1090.00

********************************************************************************
Axles:

Long side Inner axle  used, greasy	$ 40.00		$ 40.00
what a pain in the ass
from Copher's U-Pull-It
Clearwater, FL

	Total for Copher's					$ 40.00

Short side inner axle  NSP 27902-53x	$ 43.64		$ 43.64
brand new, and not a pain in the ass!

Mikes Drivelines Inc 
8901 North Nebraska Avenue, Tampa, FL 33604 
(813) 931-5814 

	Total for Copher's					$ 46.70


********************************************************************************
GRAND TOTAL (so far)					$1648.92









Misc. notes:

                                       complt assy  u-joint inner shaft
'74-78 wagoneeer cherokee (disk brake) rt 29833-3x  5-297x   27902-19x
     '78 bom 603683-2                  lt 29833-4x  5-297x   27902-20x
                                                             outer shaft
'74-78 scout II travlal                rt 29833-3x  5-297x    36859
                                       lt 29833-4x  5-297x    36859

********************************************************************************

Warn Axle specs:
********************************************************************************
http://products.warn.com/warn.nsf/pages/TruckProducts.Axles.Frontaxle.html

Inner shafts
Model 			 Year 		Part Number 	Length 	Splines U-Joint 
Jeep Wagoneer (Left)  	'80-'84 	39461 		32.12 	30 	297X 
Jeep Wagoneer (Right) 	'80-'84 	39459  		15.8 	30 	297X 

Outer shafts:
Chevy K-10, Blazer 	'73-'87 	38815 		9.94 	19 	297X 
Ford Bronco, F-150 	'71-'79 	38816 		9.72 	19 	297X 
Jeep Wagoneer (Disk) 	'74-'83 	38815 		9.94 	19 	297X 
Jeep Wagoneer (Drum) 	'74-'76 	38816 		9.72 	19 	297X 

So, to be easy, '80-'83 Jeep Wagoneer axles will be used. 
The .22" longer outer shaft I got with the wagoneer axle fits and do not seem
to be an issue, I will use them as spares... it has a 2nd snap ring groove in the right spot too.

								Hub	 Hub 
								Service	 Svc 
Hub parts from Warn:		Spline 	Std	Prem	Spindle Kit	 Kit 
Model 			  Year 	Count	kit	kit	Nut Kit Standard Premium

Bronco  		'66-'96   19	9790 	20990 	32720 	 11967	 20825 
1/2 Ton Pickup  	'59-'96   19	9790 	20990 	32720 	 11967	 20825 



wheel studs (rotor came with, but just in case, here is the part #)
SERVICE-SUPPLY  		98224  	$  0.99 

Using Stock ford knuckles, may use scout high arm ones, but probably not needed.


Yukon part #'s
http://www.yukongear.com/catalog/ykoncatalog.pdf
4340(look just like warn's numbers!:
YA W38815	D44	 9.94	outer	19	297
YA W38816	D44	 9.72	outer	19	297
YA W39459	D44	15.80	inner	30	297
YA W39461	D44	32.12	inner	30	297


oem
DAN620200	D44	9.72	outer	19	297
DAN41677	D44	9.94	outer	19	297
no listing for inner

Rear parts for 5-5.5" 
********************************************************************************
I grabbed a junkyard spindle off the wagoneer that I got the axle shaft from, 
looking to see how hard it would be to mount it to the rear for 
poor-man's full floater D44

Warn:
Full float foundation kit 	61745
Full float  hublock kit set 	36655
 or Full float drive flange set 39340
Disc brake kit 
for warn full-floater kit 	37998

emailed SSBC about my existing rear disc brake kit and upgrading...