| Pictures were shot with Sony DCR-TRV9 camera and imported with ATI
All-In-Wonder Pro video card. |
First the Ashtray is removed from the console bezel.
|
Take your time and make a nice edge, you will look at it every time you
drive!
|
My cigarette lighter connector protruded enough to warrant cutting into
the dash.
|
Close-up of the hole I cut to allow clearance.
|
Even closer shot that highlights where I almost cut into the ventilation
duct... OOOOPS!
|
Detalis of the cut on the left side of the new bezel to fit the right side
of the existing bezel.
|
Screw hole in existing bezel to fasten left side of new bezel to.
|
Hole in the new bezel. (screw is carefully inserted with screwdriver :o)
|
Holes in the new bezel and the dash that the bracket will be attached to.
|
Close up of holes that were put in the existing bezel.
|
Does the bracket look familiar? it should....
|
It is the left over piece of what was cut off :o)
|
Finished product with all 6 switches installed!
|
They don't do anything yet, but they look cool!
|
